Subject: wheel building Posted by: craig on November 09, 2004 at 23:01:33:

Message: i took the ubi class many years ago and we were taught to load the hub full of spokes first. no problem. first spoke drop drive side around 3/4 o'clock then for a "b" rim drop spoke left of that. no problem. but here is the issue sometimes when i flip the hub over to lace the non-drive my guide spoke is wrong. i see the problem i have to re-load the non-drive side,being that one spoke is shorter than the other(the head down spoke. anyone out their understand my issue, help thanks