United Bicycle Institute TECHNICAL FORUM ARCHIVE UBI Main Page UBI Courses and Schedules PLEASE NOTE: This page contains archived postings of the UBI Technical Forum for the year 2002. You may still post replies to these postings and they will be shown below. They will also show up in a search from both the main page and this page. However, all new postings (original threads) will appear on the main page only. Please remember this is an open forum - opinions expressed here are not necessarily those of United Bicycle Institute. Search: Match all words Match any word Match exact phrase Archived Years:   1997    1998    1999    2000    2001    2002    2003    2004    2005    2006

• double or triple front mechs? - Ed 11/21/06 (0)
• XT shifter/ Hayes Mag - Jamie S 21:17:02 12/30/02 (4)
  • Re: XT shifter/ Hayes Mag - Robert 07:02:35 12/31/02 (3)
    • Re: XT shifter/ Hayes Mag - dave farmer 08:02:30 12/31/02 (2)
      • Re: XT shifter/ Hayes Mag - Cyco 21:54:14 12/31/02 (1)
        • Re: XT shifter/ Hayes Mag - hawaii freerider 21:11:35 01/31/03 (0)
• linear pull centering problems - nate 23:44:36 12/29/02 (1)
  • Re: linear pull centering problems - Robert 04:25:54 12/30/02 (0)
• slipping axle - Fred Jones 20:09:35 12/28/02 (5)
  • Re: slipping axle - Robert 04:17:42 12/30/02 (0)
  • Re: slipping axle - Jim 09:16:59 12/29/02 (3)
    • Re: slipping axle - Fred Jones 09:54:02 12/30/02 (2)
      • Re: slipping axle - Jim 13:24:20 12/30/02 (1)
        • Re: slipping axle - Fred Jones 12:43:31 01/03/03 (0)
• tying and soldering - dave farmer 14:47:45 12/28/02 (5)
  • Re: tying and soldering - Pete 05:01:41 01/05/03 (0)
  • Re: tying and soldering - Mike T. 22:30:56 01/03/03 (0)
  • Re: tying and soldering - Randy Shoquist 19:16:30 12/28/02 (0)
  • Re: tying and soldering - Cyco 16:48:36 12/28/02 (1)
    • Re: tying and soldering - dave farmer 17:57:36 01/20/03 (0)
• LX Rapidfire Shifter, Doesn't - strung 22:28:24 12/27/02 (5)
  • Re: LX Rapidfire Shifter, Doesn't - Robert 04:11:56 12/28/02 (4)
    • Re: LX Rapidfire Shifter, Doesn't - Cyco 07:27:52 12/28/02 (3)
      • Re: LX Rapidfire Shifter, Doesn't - Robert 04:12:56 12/30/02 (2)
        • Shifter Failures - Cyco 07:45:40 01/01/03 (1)
          • Re: Shifter Failures - alfred 22:33:02 03/15/03 (0)
• Housing question - Chris 15:40:22 12/27/02 (2)
  • Re: Housing question - js 22:09:20 12/27/02 (0)
  • Re: Housing question - Jim 22:02:51 12/27/02 (0)
• Columbus Tenax - Bob King 22:39:42 12/25/02 (2)
  • Re: Columbus Tenax - W C Juni 02:28:07 03/24/03 (0)
  • Re: Columbus Tenax - js 01:18:00 12/28/02 (0)
• Sachs freewheel cogs - Tony Narkowicz 18:49:54 12/21/02 (3)
  • Re: Sachs freewheel cogs - Richard Leininger 11:36:02 03/10/04 (0)
  • Re: Sachs freewheel cogs - Miguel 12:08:40 08/01/03 (0)
  • Re: Sachs freewheel cogs - Jim 00:05:32 12/22/02 (0)
• 130mm wheel/135mm frame - R.M. 17:02:19 12/21/02 (3)
  • Re: 130mm wheel/135mm frame - Jim 00:04:01 12/22/02 (2)
    • Re: 130mm wheel/135mm frame - Robert 05:15:03 12/23/02 (1)
      • Re: 130mm wheel/135mm frame - hawaii freerider 21:24:18 01/31/03 (0)
• Shift/Brake Housings Dilemma - Quip 21:27:08 12/19/02 (2)
  • Re: Shift/Brake Housings Dilemma - Brian 22:42:14 12/19/02 (1)
    • Brian... MANY THANKS! I'm off to work on the puppy, now! (nm) - Quip 13:38:29 12/20/02 (0)
• Var Tools - Brian 08:18:25 12/19/02 (3)
  • Re: Var Tools - ari 21:17:42 07/30/03 (1)
    • Re: Var Tools - Daniel 02/06/06 (0)
  • Re: Var Tools - Sergi Lejardi 04:42:19 05/09/03 (0)
• campag shimano compatibility - dave m 16:07:36 12/18/02 (5)
  • Re: campag shimano compatibility - Robert 14:29:43 12/29/02 (0)
  • Re: campag shimano compatibility - Robert 04:30:45 12/19/02 (3)
    • Re: campag shimano compatibility - Jim 08:51:48 12/19/02 (2)
      • Re: campag shimano compatibility - js 17:14:23 12/20/02 (1)
        • Re: campag shimano compatibility - Jim 09:48:33 12/22/02 (0)
• kmc chains - Jim 11:52:02 12/18/02 (2)
  • Re: kmc chains - Bacon Boy 10:04:08 12/23/02 (1)
    • Re: kmc chains - Jim Githens 18:53:05 12/23/02 (0)
• Shock identification - Jim 03:08:37 12/18/02 (2)
  • Re: Shock identification - zac parsons 12:54:47 12/18/02 (0)
  • Re: Shock identification - Cyco 07:02:21 12/18/02 (0)
• Sweet Wings - Rohan Andrew 18:50:46 12/17/02 (2)
  • Re: Sweet Wings - Cyco 06:59:53 12/18/02 (0)
  • Re: Sweet Wings - Robert 06:27:42 12/18/02 (0)
• shotpeening vs. heat treating - crm 10:45:23 12/17/02 (3)
  • Re: shotpeening vs. heat treating - Bacon Boy 10:58:06 12/17/02 (2)
    • Re: shotpeening vs. heat treating - Robert 06:23:00 12/18/02 (1)
      • Re: shotpeening vs. heat treating - Cyco 06:50:01 12/18/02 (0)
• Campag cassette - ALEX 09:09:07 12/17/02 (3)
  • Re: Campag cassette - js 17:19:40 12/20/02 (0)
  • Re: Campag cassette - Robert 06:18:04 12/18/02 (0)
  • Re: Campag cassette - Jim 20:13:51 12/17/02 (0)
• first time user of clipless pedals - kike 01:12:16 12/17/02 (4)
  • Re: first time user of clipless pedals - Toronto Cyclist 12:18:04 02/29/04 (0)
  • Re: first time user of clipless pedals - Eric 16:30:49 02/07/03 (0)
  • Re: first time user of clipless pedals - Terry 10:14:28 12/17/02 (1)
    • Re: first time user of clipless pedals - Kevin 16:43:38 12/17/02 (0)
• Spoked - Dan 23:21:04 12/15/02 (3)
  • Re: Spoked - Pete 04:34:14 12/16/02 (0)
  • Re: Spoked - Cyco 03:23:13 12/16/02 (1)
    • Re: Spoked - jefferson 12:00:40 12/30/02 (0)
• Heavy Duty Road Wheels - Mike 22:50:18 12/13/02 (5)
  • Re: Heavy Duty Road Wheels - Rocky 19:14:40 06/21/04 (0)
  • Re: Heavy Duty Road Wheels - Rocky 19:13:26 06/21/04 (0)
  • Re: Heavy Duty Road Wheels - Pete 05:30:11 12/14/02 (2)
    • Re: Heavy Duty Road Wheels - Cyco 04:49:33 12/15/02 (1)
      • Re: Heavy Duty Road Wheels - Kevin 18:17:51 12/15/02 (0)
• shoes - froque 03:30:29 12/12/02 (2)
  • Re: shoes - boybacon 10:03:20 12/12/02 (1)
    • Re: shoes - Kevin 17:05:42 12/12/02 (0)
• Shimano M-960 Cranks - Al Northouse 16:32:13 12/11/02 (4)
  • Re: Shimano M-960 Cranks - Jim 17:27:45 12/11/02 (3)
    • Re: Shimano M-960 Cranks - Cyco 08:16:03 12/12/02 (2)
      • Re: Shimano M-960 Cranks - Kevin 07:43:05 02/15/03 (0)
      • Try again... - Cyco 08:23:25 12/12/02 (0)
• Bottom bracket length - Alex 16:20:34 12/11/02 (0)
• Wheel Building - Dan 18:18:08 12/10/02 (6)
  • Re: Wheel Building - Pete 07:31:49 12/11/02 (5)
    • Re: Wheel Building - Ted 17:54:17 12/28/02 (0)
    • Re: Wheel Building - Dan 13:35:24 12/11/02 (0)
    • Re: Wheel Building (clarification) - Pete 07:53:31 12/11/02 (2)
      • Re: Wheel Building (clarification) - Dan 14:07:37 12/11/02 (1)
        • Re: Wheel Building (clarification) - Cyco 14:31:21 12/11/02 (0)
• Miller welders,which one - Todd Runfeldt 03:05:38 12/10/02 (1)
  • Re: Miller welders,which one - paul somero 03:03:00 01/12/03 (0)
• bike e pannier racks - Tom 13:55:49 12/09/02 (3)
  • Re: bike e pannier racks - Robert 06:39:27 12/10/02 (2)
    • Re: bike e pannier racks - tom 20:56:23 12/11/02 (0)
    • Re: bike e pannier racks - Tom 11:59:16 12/10/02 (0)
• Campy 10 Speed To 9 - Nick 09:10:43 12/07/02 (1)
  • Re: Campy 10 Speed To 9 - Cyco 16:07:37 12/07/02 (0)
• upgrade - lanny 10:23:43 11/30/02 (3)
  • Re: upgrade - Jim 18:18:59 11/30/02 (2)
    • Re: upgrade - Robert 07:32:13 12/02/02 (1)
      • Re: Yeah, - Jim 10:37:15 12/02/02 (0)
• cogset - froque 19:09:14 11/29/02 (4)
  • Re: cogset - Robert 07:09:22 11/30/02 (3)
    • Re: cogset - Kevin 23:34:46 11/30/02 (2)
      • Re: cogset - froque 05:46:09 12/01/02 (1)
        • Re: cogset - Robert 07:28:51 12/02/02 (0)
• Time pedal maintenance - Rich 17:25:01 11/29/02 (1)
  • Re: Time pedal maintenance - crm 17:51:58 11/30/02 (0)
• some question on on bicyles standard measurements - rbx 01:02:12 11/29/02 (2)
  • Bike frame and bike sizes - Dennis Meseroll 02:52:46 05/18/03 (1)
    • Re: Bike frame and bike sizes - CJ 04/14/06 (0)
• Bendix automatic 2 speed coaster brake - Chuck G. 17:40:14 11/27/02 (4)
  • Re: Bendix automatic 2 speed coaster brake - jim pearson 06:39:09 07/31/03 (0)
  • Re: Bendix automatic 2 speed coaster brake - evans 00:18:41 12/06/02 (2)
    • Re: Bendix automatic 2 speed coaster brake - Jay 09/22/04 (0)
    • Re: Bendix automatic 2 speed coaster brake - Deb 15:51:03 06/30/03 (0)
• Centurion Expert Ironman "Dave Scott" - Steve 22:22:17 11/25/02 (3)
  • Re: Centurion Expert Ironman "Dave Scott" - Stephen Quintana 19:51:47 04/28/03 (1)
    • Re: Centurion Expert Ironman "Dave Scott" - John Redmond 12:02:19 04/18/04 (0)
  • Re: Centurion Expert Ironman - Kevin 18:34:53 11/26/02 (0)
• BBT-7 the correct tool for Dura Ace fixed cup? - crm 01:20:55 11/25/02 (4)
  • BBT-7 made for Dura-Ace specifically - Calvin Jones-Park Tool 08:06:26 11/25/02 (3)
    • Re: BBT-7 made for Dura-Ace specifically - crm 12:12:26 11/25/02 (2)
      • Re: BBT-7 made for Dura-Ace specifically - Calvin Jones-Park Tool 14:46:17 11/25/02 (1)
        • Thanks for the info. (eom) - crm 11:09:55 11/26/02 (0)
• sapim cx ray - froque 04:37:05 11/24/02 (1)
  • Re: sapim cx ray - Cyco 17:04:38 11/24/02 (0)
• Titanium or High Quality Steel? - Mike B. 23:41:39 11/23/02 (2)
  • Re: Titanium or High Quality Steel? - Robert 04:41:29 11/24/02 (0)
  • Re: Titanium or High Quality Steel? - Jim 23:57:55 11/23/02 (0)
• Manitou SXR (1998) - CG-P 09:07:05 11/23/02 (2)
  • Re: Manitou SXR (1998) - Cyco 16:38:37 11/23/02 (1)
    • Re: Manitou SXR (1998) - Daniel (www.troitino.hpg.com.br) 14:22:40 12/14/02 (0)
• Sidi spare parts - CG-P 09:04:09 11/23/02 (1)
  • Re: Sidi spare parts - Robert 04:36:42 11/24/02 (0)
• Titanium Furniture? - Simon 07:11:48 11/23/02 (3)
  • Re: Titanium Furniture? - Peter Kirkiles, Perfect Circle Metalworks 08:40:55 03/23/03 (0)
  • Re: Titanium Furniture? - tom 15:23:43 01/05/03 (1)
    • Re: Titanium Furniture? - Ben 20:26:54 04/11/03 (0)
• titanium spokes - Jon 08:44:21 11/21/02 (12)
  • Re: titanium spokes - Shahid 11:52:00 03/22/03 (0)
  • Re: titanium spokes - Russ 15:06:52 01/30/03 (0)
  • Re: titanium spokes - JH 14:25:31 01/15/03 (0)
  • Re: titanium spokes - Pete 16:34:06 11/28/02 (3)
    • Re: titanium spokes - Cyco 15:05:06 12/02/02 (2)
      • Re: titanium spokes - Pete 20:48:28 12/04/02 (1)
        • Re: titanium spokes - Cyco 15:23:13 12/05/02 (0)
  • Re: titanium spokes - Robert 06:10:53 11/22/02 (1)
    • Re: titanium spokes - perry 14:03:35 05/20/03 (0)
  • Re: titanium spokes - Kevin 18:06:08 11/21/02 (2)
    • Re: titanium spokes - Cyco 03:37:59 11/22/02 (1)
      • Re: titanium spokes - Kevin 17:42:24 11/22/02 (0)
• BB- Loctite or anti-seize - crm 01:40:18 11/21/02 (7)
  • Re: BB- Loctite or anti-seize - Jim 08:45:26 11/21/02 (1)
    • Re: BB- Loctite or anti-seize - Robert 05:54:25 11/22/02 (0)
  • Re: BB- Loctite or anti-seize - Robert 05:50:50 11/21/02 (0)
  • Re: BB- Loctite or anti-seize - Cyco 04:31:23 11/21/02 (3)
    • What exactly is teflon tape? - crm 01:29:09 11/22/02 (1)
      • Re: What exactly is teflon tape? - Cyco 03:28:48 11/22/02 (0)
    • Re: BB- Loctite or anti-seize - Kevin 18:09:08 11/21/02 (0)
• Red goo? - Chris 09:13:43 11/19/02 (1)
  • Re: Red goo? - Cyco 15:14:17 11/19/02 (0)
• wheel related tools - emily 17:37:31 11/18/02 (4)
  • Re: wheel related tools - Robert 06:43:59 11/19/02 (0)
  • Re: wheel related tools - Wai Keong. Law 00:12:07 11/19/02 (2)
    • Re: wheel related tools - Cyco 06:15:01 11/19/02 (1)
      • Re: wheel related tools - Wai Keong 02:50:24 12/05/02 (0)
• shoes - Mike 12:37:39 11/18/02 (1)
  • Re: shoes - Cyco 15:11:07 11/18/02 (0)
• 1 1/8 Fork Crowns - Adam Sotkin 18:27:48 11/17/02 (1)
  • Re: 1 1/8 Fork Crowns - Robert 05:05:33 11/18/02 (0)
• tig amperage - nick 16:43:44 11/15/02 (0)
• Profile Design Airstryke Aerobars - Roadie-for-Life 15:51:52 11/15/02 (3)
  • Re: Profile Design Airstryke Aerobars - Kevin 16:53:56 11/15/02 (2)
    • Re: Profile Design Airstryke Aerobars - Roadie-for-Life 11:10:16 11/16/02 (1)
      • Re: Profile Design Airstryke Aerobars - Kevin 18:48:44 11/16/02 (0)
• 650C wheel dimensions - mark enders 00:41:20 11/15/02 (2)
  • Re: 650C wheel dimensions - n/a 20:53:51 04/06/03 (0)
  • Re: 650C wheel dimensions - Robert 04:28:21 11/16/02 (0)
• Disc rotor out of true? - Tony 16:50:54 11/14/02 (3)
  • Re: Disc rotor out of true? - Doobin 06:37:15 04/18/04 (0)
  • Re: Disc rotor out of true? - Cyco 04:52:55 11/15/02 (1)
    • Re: Disc rotor out of true? - Tony 16:42:26 11/15/02 (0)
• tubing strength - chris hoag 12:36:29 11/13/02 (3)
  • Re: tubing strength - karl dean 04:35:38 01/14/03 (0)
  • Re: tubing strength - Brian 21:15:49 11/15/02 (1)
    • Re: tubing strength - chris hoag 18:11:45 11/20/02 (0)
• painting - chas 00:22:10 11/13/02 (1)
  • Re: painting - Matthew J Hunter 19:54:36 01/04/03 (0)
• Deore FH M555 HUB PROBLEM - AJ 17:46:11 11/12/02 (6)
  • Re: Deore FH M555 HUB PROBLEM - drew 12:36:33 11/23/02 (0)
  • Re: Deore FH M555 HUB PROBLEM - Kevin 18:39:44 11/12/02 (4)
    • Re: Deore FH M555 HUB PROBLEM - Adolfo Serna 22:19:44 08/07/03 (0)
    • Re: Deore FH M555 HUB PROBLEM - AJ 00:06:23 11/13/02 (2)
      • Re: Deore FH M555 HUB PROBLEM - Ken 16:54:33 11/13/02 (1)
        • Re: Deore FH M555 HUB PROBLEM - Cyco 18:22:05 11/13/02 (0)
• tire size - froque 17:17:26 11/10/02 (6)
  • Re: tire size - Pete 23:13:12 12/04/02 (0)
  • Re: tire size - Cyco 18:01:39 11/10/02 (4)
    • Re: tire size - Froque 16:22:01 11/11/02 (3)
      • Re: tire size - Cyco 06:18:06 11/12/02 (2)
        • Re: tire size - Felipe Roque 06:53:25 11/14/02 (1)
          • Re: tire size - Cyco 15:49:54 11/14/02 (0)
• Crank arms length - froque 17:03:15 11/10/02 (5)
  • Re: Crank arms length - Bill Boston 15:31:42 12/05/02 (1)
    • Re: Crank arms length - Pete 15:10:43 12/06/02 (0)
  • Re: Crank arms length - Pete 17:14:37 11/28/02 (1)
    • Re: Crank arms length - Pete 21:48:35 12/04/02 (0)
  • Re: Crank arms length - Cyco 17:53:11 11/10/02 (0)
• freewheel change - victor 18:55:24 11/08/02 (3)
  • Re: freewheel change - Jim 21:07:16 11/08/02 (2)
    • Re: freewheel change - victor 10:49:45 11/09/02 (1)
      • Re: freewheel change - Jim 18:41:36 11/09/02 (0)
• Wireless Computer on rear wheel - Dave S 12:09:18 11/08/02 (1)
  • Re: Wireless Computer on rear wheel - Cyco 22:25:18 11/08/02 (0)
• steel tubing storage - john 16:15:30 11/06/02 (2)
  • Re: steel tubing storage - Rob Thayer 09:29:24 11/09/02 (0)
  • Re: steel tubing storage - Randy Shoquist 08:01:33 11/08/02 (0)
• Bad gear combos for Campy 10 speed? - Tony 23:10:13 11/05/02 (2)
  • Re: Bad gear combos for Campy 10 speed? - Jim 08:45:27 11/06/02 (0)
  • Sorry bout double-post. Refresh problems on puter. - Tony 23:17:09 11/05/02 (0)
• Bad Campy 10spd gear combos? - Tony 22:58:40 11/05/02 (5)
  • Re: Bad Campy 10spd gear combos? - russell tanko 12:21:18 04/26/03 (0)
  • Re: Bad Campy 10spd gear combos? - Cyco 00:04:13 11/06/02 (3)
    • Re: Bad Campy 10spd gear combos? - Kevin 16:41:02 11/07/02 (2)
      • Re: Bad Campy 10spd gear combos? - Tony 17:00:09 11/14/02 (0)
      • Re: Bad Campy 10spd gear combos? - Tony 16:57:26 11/14/02 (0)
• Jockey Pulley Hits Sprocket - John T. 17:53:48 11/05/02 (3)
  • Re: Jockey Pulley Hits Sprocket - Chunt 23:44:40 11/05/02 (0)
  • Re: Jockey Pulley Hits Sprocket - Jim 18:10:31 11/05/02 (1)
    • Re: Jockey Pulley Hits Sprocket - john brown 18:16:00 11/05/02 (0)
• Long reach brakes - Mr. D. Beltrane 15:50:08 11/05/02 (4)
  • Re: Long reach brakes - Jim 18:16:09 11/05/02 (3)
    • Re: Long reach brakes - Mr.D.Beltrane 17:15:52 11/06/02 (2)
      • Re: Long reach brakes - Mr. D. Beltrane 17:41:07 11/06/02 (1)
        • Re: Long reach brakes - David Feldman 10:19:02 11/23/02 (0)
• connectiong dropout to carbon tubes - Daniel 13:04:59 11/05/02 (0)
• Kestral talon - Robert 03:55:37 11/05/02 (5)
  • Re: Kestral talon - Dave S 13:53:18 11/05/02 (4)
    • Re: Kestral talon - Robert 17:27:11 11/05/02 (3)
      • Re: Kestral talon - Jim 17:48:49 02/15/03 (0)
      • Re2: Kestral talon - Dave S 21:36:08 11/05/02 (0)
      • Re: Kestral talon - Dave S 21:32:39 11/05/02 (0)
• Removing headset spacers - Mike Schwartz 16:54:54 11/04/02 (1)
  • Re: Removing headset spacers - Cyco 17:09:39 11/05/02 (0)
• fork stuff - Seth 21:39:46 11/03/02 (1)
  • Re: fork stuff - Jim 08:24:37 11/04/02 (0)
• freewheel numbers - kasper 13:02:48 11/03/02 (4)
  • Re: freewheel numbers - Terry 07:20:38 11/04/02 (2)
    • Re:Really....? - Jim 08:19:36 11/04/02 (1)
      • Oops - Terry 10:43:07 11/04/02 (0)
  • Re: freewheel numbers - Jim 13:18:39 11/03/02 (0)
• Tamari - Scott 20:15:23 11/02/02 (1)
  • Re: Tamari - alv 05:11:33 05/26/03 (0)
• 8 speed DA with 105 derailleur?? - mark 09:11:49 11/01/02 (5)
  • Re: 8 speed DA with 105 derailleur?? - john brown 10:42:40 11/01/02 (4)
    • Re: 8 speed DA with 105 derailleur?? - Kevin 16:45:28 11/01/02 (3)
      • Re: 8 speed DA with 105 derailleur?? - Jim 18:28:34 11/01/02 (0)
      • Re: 8 speed DA with 105 derailleur?? - Cyco 17:37:32 11/01/02 (1)
        • Re: 8 speed DA with 105 derailleur?? - Kevin 17:44:15 11/01/02 (0)
• Seatpost Sizing Trouble - Chris Bernique 05:18:56 11/01/02 (2)
  • Re: Seatpost Sizing Trouble - Alex 07:04:01 11/01/02 (1)
    • Re: Seatpost Sizing Trouble - Kevin 16:47:31 11/01/02 (0)
• Derailer - Omar Bell 00:17:31 11/01/02 (1)
  • Re: Derailer - Terry 07:26:17 11/04/02 (0)
• upgrade to index shifting - josg 16:12:09 10/31/02 (2)
  • Re: upgrade to index shifting - Jim 20:09:01 10/31/02 (1)
    • Re: also - Jim 20:11:44 10/31/02 (0)
• fork offset/rake - steve 16:41:38 10/29/02 (2)
  • Re: fork offset/rake - Sigmund 08:31:45 01/31/04 (0)
  • Re: fork offset/rake - Cyco 18:05:26 10/29/02 (0)
• Shimano 105 6-speed specs - Rick Turiano 09:01:10 10/28/02 (1)
  • Re: Shimano 105 6-speed specs - Jim 09:47:45 10/28/02 (0)
• my 7speed RSX shifters broke--what to do?? - DCbiker 22:36:54 10/27/02 (24)
  • Re: my 7speed RSX shifters broke--what to do?? - Brad Farley 16:28:39 12/31/02 (0)
  • Re: my 7speed RSX shifters broke--what to do?? - The Bike Doctor 00:56:39 12/22/02 (0)
  • Re: my 7speed RSX shifters broke--what to do?? - js 12:07:30 10/28/02 (12)
    • well actually - Jim 20:12:36 10/28/02 (12)
      • well actually - Jim 20:12:36 10/28/02 (11)
        • Re: well actually - js 21:33:09 10/28/02 (10)
          • Re: well actually - Jim 08:37:38 10/29/02 (9)
            • Re: well actually - js 09:58:39 10/29/02 (8)
              • Re: Holy cow........ - Jim 10:20:45 10/29/02 (7)
                • Re: Holy cow........ - js 11:10:14 10/29/02 (6)
                  • Re: HaaHa - Jim 12:18:47 10/29/02 (5)
                    • Re: HaaHa - js 12:59:30 10/29/02 (4)
                      • Re: another point - Jim 15:02:53 10/29/02 (0)
                      • Re: HFC... - Jim 14:33:07 10/29/02 (2)
                        • Re: HFC... - Cyco 18:32:16 10/29/02 (1)
                          • Re: Thanks!.....NM - Jim 10:41:32 10/30/02 (0)
    • Re: my 7speed RSX shifters broke--what to do?? - Jim 08:13:24 10/28/02 (1)
      • Re: my 7speed RSX shifters broke--what to do?? - DCBiker 12:54:47 10/28/02 (0)
    • Re: my 7speed RSX shifters broke--what to do?? - Cyco 03:25:08 10/28/02 (6)
      • Re: my 7speed RSX shifters broke--what to do?? - Kevin 17:17:13 10/28/02 (0)
      • 9 speed shifter/7 speed cassette? - Jim 08:19:29 10/28/02 (4)
        • Re: 9 speed shifter/7 speed cassette? - g 10:28:41 04/10/03 (0)
        • Re: 9 speed shifter/7 speed cassette? - version88 10:39:27 04/09/03 (0)
        • Re: 9 speed shifter/7 speed cassette? - Kevin 17:19:40 10/28/02 (1)
          • Re: 9 speed shifter/7 speed cassette? - David FEldman 16:02:53 10/29/02 (0)
  • nexus disc brake - Ivory Curry 09:45:29 10/27/02 (1)
  • turning angle - dave 15:35:23 10/26/02 (2)
    • Re: turning angle - john brown 10:13:18 10/27/02 (0)
    • Re: turning angle - Cyco 16:43:27 10/26/02 (0)
  • Mavic cross max spokes wrench - Guy Luria 08:27:38 10/26/02 (1)
    • Re: Mavic cross max spokes wrench - js 06:53:15 10/27/02 (0)
  • victor Kasper up here! - js 09:03:40 10/25/02 (3)
    • Re: victor Kasper up here! - victor kasper 10:41:57 10/25/02 (2)
      • Re: victor Kasper up here! - Cyco 18:51:34 10/25/02 (1)
        • Re: victor Kasper up here! - victor kasper 01:14:09 10/26/02 (0)
  • Moser Frame Quality - Dan 14:19:06 10/24/02 (2)
    • Re: Moser Frame Quality - Russ Bellew 13:54:50 12/14/02 (0)
    • Re: Moser Frame Quality - Jim 15:13:14 10/24/02 (0)
  • Bending fork blades? - Anders 12:31:26 10/23/02 (5)
    • Re: Bending fork blades? - Jim 14:42:18 10/23/02 (4)
      • Re: Bending fork blades? - Anders 08:19:19 10/24/02 (3)
        • Re: Bending fork blades? - Tom Mancuso 20:29:06 10/24/02 (2)
          • Re: Bending fork blades? - Anders 13:53:54 10/28/02 (1)
            • spoon and fork bending - mostafa 07:46:38 07/21/03 (0)
  • upgrading old bike - Victor Kasper 23:59:53 10/22/02 (16)
    • Re: upgrading old bike - js 07:55:19 10/23/02 (15)
      • Re: upgrading old bike - Jim 08:14:42 10/23/02 (14)
        • Re: upgrading old bike - Victor Kasper 10:34:29 10/23/02 (13)
          • Re: upgrading old bike - Jim Milehibiker80124@aol.com 16:18:28 10/23/02 (12)
            • Re: upgrading old bike - Kevin 23:54:01 10/23/02 (11)
              • Re: Krvin - Jim 13:37:41 10/24/02 (0)
              • Re:Kevin........ - Jim 13:26:49 10/24/02 (2)
                • Re:Kevin........ - Kevin 13:45:55 10/24/02 (1)
                  • Re:Kevin........Whatever. - Jim 13:59:50 10/24/02 (0)
                  (0)
                • Re: Chain binds btw chainrings - Jim 16:27:40 08/29/02 (1)
                  • Re: Chain binds btw chainrings - danburgh 08:52:20 08/30/02 (0)
              • Need Info On Rims - Poor Paul 10:38:03 08/29/02 (1)
                • Re: Need Info On Rims - Barry 03:51:40 10/10/02 (0)
              • Colnago frames - Alex 08:37:14 08/29/02 (3)
                • Re: Colnago frames - Barry 01:19:46 10/19/02 (0)
                • Re: Colnago frames - Jim 08:56:23 08/29/02 (1)
                  • Re: Colnago frames - Kevin 16:39:29 08/29/02 (0)
              • carbon vs titanium - harry armon 11:30:24 08/28/02 (3)
                • Re: carbon vs titanium - Robert 03:52:23 09/02/02 (0)
                • Re: carbon vs titanium - Alex 08:39:13 08/29/02 (1)
                  • Re: carbon vs titanium - Jim 08:54:21 08/29/02 (0)
              • Handlebar width. - Fred 11:11:42 08/28/02 (2)
                • Re: Handlebar width. - Barry 03:55:29 10/10/02 (0)
                • Re: Handlebar width. - kd 15:29:15 08/30/02 (0)
              • stickers - Tobias 14:29:41 08/27/02 (0)
              • HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - Pierce 23:15:28 08/25/02 (20)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - yatta 11/01/05 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - yatta 11/01/05 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - David 17:15:59 01/26/04 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - carl 06:07:18 07/14/03 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - eric 11:40:10 06/26/03 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - eric 11:39:15 06/26/03 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - caleb paczkowski 13:38:47 06/16/03 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - bob 19:36:00 05/31/03 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - bob 19:35:40 05/31/03 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - Craig Lewis 17:12:52 05/30/03 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - radin 11:44:59 05/27/03 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - Ray Quiles 16:00:34 05/26/03 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - Kris 00:32:47 05/23/03 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - t7 20:05:44 10/22/02 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - t7 20:05:43 10/22/02 (0)
                • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - Robert 04:39:06 08/26/02 (4)
                  • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - changa du 04/04/06 (0)
                  • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - ineedmoneyfasho 16:24:20 10/03/02 (2)
                    • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - tom hall 08/24/05 (0)
                    • Re: HOW DO I PAINT A BIKE MYSELF? WHAT PAINT SHOULD I USE? - superman 14:39:21 04/23/04 (0)
              • Taping Handlebars - Ken Spencer 01:37:50 08/25/02 (2)
                • Re: Taping Handlebars - chris kessler 06:48:06 09/30/02 (0)
                • end caps - kd 05:20:08 08/25/02 (0)
              • 1990 Trek 1500? - Will 21:05:06 08/24/02 (2)
                • Re: 1990 Trek 1500? - Barry 04:02:40 10/10/02 (0)
                • Re: 1990 Trek 1500? - Jim 19:53:31 08/25/02 (0)
              • seat post size - chris hoag 19:38:09 08/23/02 (3)
                • Re: seat post size - Barry 04:00:09 10/10/02 (0)
                • Re: seat post size - Jim 20:03:29 08/23/02 (1)
                  • Re woopsie - Jim 20:08:46 08/23/02 (0)
              • 2003 XTR test ride - Cyco 17:07:22 08/23/02 (8)
                • Re: 2003 XTR test ride - JAMES ENWOOD 21:36:35 11/11/02 (0)
                • Re: 2003 XTR test ride - chris 13:22:41 10/01/02 (0)
                • Re: 2003 XTR test ride - A REAL BIKE MECHANIC 04:44:42 08/27/02 (5)
                  • Re: 2003 XTR test ride - jon 05:52:18 08/28/02 (4)
                    • Re: 2003 XTR test ride - A REAL BIKE MECHANIC 16:20:56 09/02/02 (3)
                      • 2003 XTR test riden - Cyco 08:38:13 09/09/02 (2)
                        • Re: 2003 XTR test riden - Robert 01:30:22 09/11/02 (1)
                          • Re: 2003 XTR test riden - Barry 01:13:38 10/19/02 (0)
              • track bike brake mounting - Brian O'Sullivan 15:43:51 08/20/02 (4)
                • Re: track bike brake mounting - Robert 04:48:08 08/26/02 (1)
                  • Re: track bike brake mounting - Cyco 16:44:29 08/26/02 (0)
                • Re: track bike brake mounting - kevin 17:27:05 08/20/02 (1)
                  • Re: track bike brake mounting - Cyco 05:55:53 08/21/02 (0)
              • welding caps vs bicycle caps - dave 21:08:26 08/19/02 (4)
                • Re: welding caps vs bicycle caps - marco escalante 21:09:13 05/23/03 (0)
                • Re: welding caps vs bicycle caps - Randy Shoquist 07:13:58 08/20/02 (2)
                  • Re: welding caps are to protect you - joanna 09:59:57 06/24/03 (0)
                  • Re: welding caps vs bicycle caps - joanna 09:56:25 06/24/03 (0)
              • Spoke length question... - John Y. 12:28:43 08/19/02 (1)
                • Re: Spoke length question... - Robert 04:54:17 08/26/02 (0)
              • cantilever brakes - jeff 00:05:09 08/19/02 (1)
                • Re: cantilever brakes - Robert 05:10:40 08/26/02 (0)
              • Third chain ring on old frame - Emmet Band 17:36:50 08/18/02 (3)
                • Re: Third chain ring on old frame - nate@zula.org 18:56:28 08/30/02 (0)
                • Re: Third chain ring on old frame - Caruso 07:15:21 08/24/02 (0)
                • Re: Third chain ring on old frame - Jim 08:37:03 08/19/02 (0)
              • Spoke length for xt hubs and mavic f519s - Oliver 17:16:05 08/18/02 (0)
              • de-lacing wheels and used spokes - John Y. 14:05:23 08/18/02 (2)
                • Re: de-lacing wheels and used spokes - Adrian 23:20:07 08/18/02 (0)
                • Re: de-lacing wheels and used spokes - Adrian 23:16:56 08/18/02 (0)
              • Cantilever, V-Brake, Road - Bruno 10:06:43 08/18/02 (2)
                • Re: Cantilever, V-Brake, Road - Kevin 13:31:20 08/18/02 (1)
                  • Re: Cantilever, V-Brake, Road - Cyco 21:35:56 08/18/02 (0)
              • mig welding - Rob 16:49:17 08/17/02 (1)
                • Re: mig welding - Cyco 17:36:14 08/17/02 (0)
              • lockring failure - tedt 15:54:06 08/16/02 (5)
                • Re: lockring failure - Adrian 23:26:42 08/18/02 (0)
                • Re: lockring failure - Jim 19:39:13 08/16/02 (3)
                  • Re: lockring failure - tedt 23:34:15 08/16/02 (2)
                    • Re: lockring failure - Jim 08:23:17 08/17/02 (1)
                      • Re: lockring failure - nate 18:59:54 08/30/02 (0)
              • high wheel - Tony castrox 12:11:22 08/15/02 (0)
              • shifting problem - alnhwrd 03:18:19 08/14/02 (2)
                • Re: shifting problem - Barry 04:08:09 10/10/02 (0)
                • Re: shifting problem - Damian 21:27:29 08/14/02 (0)
              • High speed shimmy - Chuck Rose 20:33:01 08/13/02 (4)
                • Re: High speed shimmy - Randy Shoquist 17:28:59 08/16/02 (2)
                  • Re: High speed shimmy - Chuck Roe 21:11:21 08/18/02 (1)
                    • Oh, okay - Randy Shoquist 22:20:04 08/18/02 (0)
                • Re: High speed shimmy - Kevin 14:13:23 08/14/02 (0)
              • Large Pannier Recommendation Wanted - Bob 12:24:57 08/13/02 (2)
                • Re: Large Pannier Recommendation Wanted - Chris H 15:11:21 08/20/02 (1)
                  • Re: Large Pannier Recommendation Wanted - nate 19:11:49 08/30/02 (0)
              • XT Ultegra STI? - Bruno 13:17:28 08/12/02 (1)
                • Re: XT Ultegra STI? - Cyco 16:33:56 08/12/02 (0)
              • sweet wings - alfredo 09:39:02 08/12/02 (0)
              • decals on titanium - Chris 10:03:02 08/11/02 (2)
                • Re: decals on titanium - Jim 17:09:04 08/11/02 (0)
                • Re: decals on titanium - MadDawg 13:33:06 08/11/02 (0)
              • Drivetrain Upgrade - Adam Wiegand 20:14:17 08/10/02 (4)
                • Re: Drivetrain Upgrade - Kevin 01:33:10 08/11/02 (3)
                  • Re: More than that Kevin - Jim 08:54:43 08/11/02 (2)
                    • apologie to adam-explanation to jim - Kevin 11:25:24 08/11/02 (1)
                      • Re: apologie to adam-explanation to jim - Adam Wiegand 12:26:25 08/11/02 (0)
              • Replacing bottom bearings - Dave Thompson 14:59:38 08/09/02 (4)
                • Re: Replacing bottom bearings - Kevin 16:07:09 08/09/02 (3)
                  • Re: Replacing bottom bearings - Jim 17:06:23 08/09/02 (2)
                    • Re: Replacing bottom bearings - peter l. 21:21:38 08/13/02 (1)
                      • Re: Replacing bottom bearings - Cyco 16:44:12 08/14/02 (0)
              • stem lenght - alfredo 13:52:01 08/09/02 (2)
                • Re: stem lenght - Jim 17:03:24 08/09/02 (0)
                • Re: stem lenght - Kevin 16:03:48 08/09/02 (0)
              • studded tyres - Alistair Emery 15:25:19 08/07/02 (3)
                • Re: studded tyres - brian 19:40:05 09/21/02 (0)
                • Re: studded tyres - kevin 16:00:51 08/09/02 (1)
                  • Re: studded tyres - fred 18:30:05 08/09/02 (0)
              • chain cleaners - damon 15:03:01 08/06/02 (1)
                • Re: chain cleaners - Damian 20:04:27 08/06/02 (0)
              • steel tubing - lARRY 12:27:23 08/06/02 (4)
                • Re: steel tubing - Robert 04:21:42 08/09/02 (2)
                  • Re: steel tubing - joe hoelscher 15:20:01 12/27/02 (0)
                  • Re: steel tubing - Joe Hoelscher 15:16:56 12/27/02 (0)
                • Re: steel tubing - Jim 12:47:57 08/06/02 (0)
              • howto build coaster brake hub? - autumn 18:19:58 08/05/02 (2)
                • Re: howto build coaster brake hub? - Steve 19:28:30 08/08/02 (1)
                  • Re: howto build coaster brake hub? - johnr 19:02:49 10/14/02 (0)
              • stuck stem - norm rognalsen 08:25:28 08/05/02 (2)
                • Re: stuck stem - Jim 16:39:27 08/05/02 (0)
                • Re: stuck stem - fvfhv 15:19:14 08/05/02 (0)
              • XT 737 levers and V brakes - Mike 23:44:06 08/04/02 (0)
              • removing 1 piece cranks - jeff 17:02:54 08/04/02 (1)
                • Re: removing 1 piece cranks - Cyco 23:09:56 08/04/02 (0)
              • Wierd truing problem - Lloyd Deane 16:10:59 08/04/02 (1)
                • Check hub bearings - Calvin Jones-Park Tool 09:57:47 08/06/02 (0)
              • Spoke tension meter that works on bmx wheels - Daniel WEgan 13:32:08 08/04/02 (1)
                • Re: Spoke tension meter that works on bmx wheels - REZA SARDASHTI 15:09:36 09/09/02 (0)
              • Road stem removal - Cary 03:21:59 08/02/02 (1)
                • Re: Road stem removal - Jim 08:31:32 08/02/02 (0)
              • Cannondale Front shifting problems - Richard 12:41:39 08/01/02 (8)
                • Re: Cannondale Front shifting problems - Adrian 22:58:17 08/06/02 (0)
                • Re: Cannondale Front shifting problems - Robert 07:01:36 08/03/02 (0)
                • Re: Cannondale Front shifting problems - RICHARD 17:01:35 08/02/02 (1)
                  • Re: Cannondale Front shifting problems - Cyo 05:49:56 08/03/02 (0)
                • Re: Cannondale Front shifting problems - Alex 08:27:44 08/02/02 (1)
                  • Re: Cannondale Front shifting problems - Joe Knepper 09:07:10 11/25/02 (0)
                • Re: Cannondale Front shifting problems - Jim 20:21:54 08/01/02 (0)
                • Re: Cannondale Front shifting problems - Kevin 12:59:02 08/01/02 (0)
              • upgrading 1993 kestrel - John M 12:07:12 08/01/02 (5)
                • Re: upgrading 1993 kestrel - Kevin 12:51:20 08/01/02 (4)
                  • Re: upgrading 1993 kestrel - Test 06:57:49 11/30/02 (0)
                  • Re: Update your database kevin - Jim 20:14:20 08/01/02 (2)
                    • Re: Update your database kevin - Cyco 08:28:26 08/02/02 (1)
                      • Re: Cheating front derailer. - Jim 10:04:39 08/02/02 (0)
              • Narrow Chain vs Super narrow chain front mech compatibility - Trevor 04:50:57 08/01/02 (4)
                • Re: Narrow Chain vs Super narrow chain front mech compatibility - Robert 06:45:42 08/03/02 (1)
                  • Re: Narrow Chain vs Super narrow chain front mech compatibility - Trevor 12:21:56 08/05/02 (0)
                • oops sorry about the first post...MY fault - Kevin 12:54:19 08/01/02 (0)
                • Re: Narrow Chain vs Super narrow chain front mech compatibility - Kevin 12:52:11 08/01/02 (0)
              • 1" vs 11/8" headtube - lynn 21:57:03 07/30/02 (2)
                • Re: 1" vs 11/8" headtube - Robert 06:26:31 08/03/02 (0)
                • Re: 1" vs 11/8" headtube - Kevin 22:43:58 07/30/02 (0)
              • headset binding - Darren 14:00:53 07/30/02 (5)
                • Re: headset binding - Robert 06:19:11 08/03/02 (0)
                • Re: headset binding - Jim 21:52:57 07/30/02 (2)
                  • Re: headset binding - Darren 16:43:54 07/31/02 (1)
                    • Re: headset binding - Cyco 06:04:00 08/01/02 (0)
                • Re: headset binding - Kevin 14:10:31 07/30/02 (0)
              • fix frame dent - sean 17:52:35 07/29/02 (1)
                • Re: How to fix upper tube dent - sean 16:13:46 07/30/02 (0)
              • Q-Factor - Tim Jensen 04:27:17 07/27/02 (6)
                • Re: Q-Factor - Robert 06:00:41 07/27/02 (5)
                  • Re: Q-Factor - Kevin 00:57:22 07/28/02 (4)
                    • Re: Q-Factor - Brian farrell 20:39:49 12/28/02 (0)
                    • Q-factor does invlove your feet to pedal! HAH i love being right - Kevin 01:03:36 07/28/02 (2)
                      • Foot to pedal, or pedal to crank? - Robert 05:22:24 07/29/02 (1)
                        • More on skewed seats...... - DanO 12:47:30 08/27/02 (0)
              • dura ace rear sti problems - richard 00:53:48 07/27/02 (2)
                • Re: dura ace rear sti problems - Robert 05:54:01 07/27/02 (1)
                  • Re: dura ace rear sti problems - Jim 08:18:55 07/27/02 (0)
              • coaster brake - Fast Eddie 15:14:58 07/26/02 (2)
                • Re: coaster brake - Robert 05:47:45 07/27/02 (1)
                  • Re: coaster brake - Dave Minter 09:47:02 08/16/02 (0)
              • RSX SHIFT LEVER - FERENC 08:12:01 07/26/02 (4)
                • Re: RSX SHIFT LEVER - kd 10:55:43 07/26/02 (3)
                  • Re: RSX SHIFT LEVER - Jim 19:53:13 07/26/02 (2)
                    • Re: RSX SHIFT LEVER - FERENC 05:25:28 07/29/02 (1)
                      • Re: RSX SHIFT LEVER - Jim 19:52:16 07/29/02 (0)
              • Disc Wheel Lacing - Rob Thoms 12:43:32 07/25/02 (3)
                • Re: Disc Wheel Lacing - Barry 01:17:53 10/19/02 (0)
                • Re: Disc Wheel Lacing - Robert 05:40:59 07/27/02 (1)
                  • Re: Disc Wheel Lacing - Jamie 21:12:27 12/30/02 (0)
              • XC-Pro spindle length - Hal 12:14:50 07/25/02 (1)
                • Re: XC-Pro spindle length - Robert 05:32:32 07/27/02 (0)
              • Adjusting a front STI lever for double - johnny 11:41:31 07/24/02 (1)
                • Re: Adjusting a front STI lever for double - Jim 20:04:34 07/24/02 (0)
              • new to cleats - eoghan 21:46:13 07/22/02 (2)
                • Re: new to cleats - Simon Day 05:47:32 07/27/02 (0)
                • Re: new to cleats - Kevin 23:56:43 07/22/02 (0)
              • Shimano Flight Deck Mount-OS Bars - gray 10:44:09 07/22/02 (0)
              • Throwing Chains - PoorPaul 00:28:25 07/20/02 (5)
                • Re: Throwing Chains - Damian 20:20:50 07/20/02 (0)
                • Re: Throwing Chains - Jim 08:14:27 07/20/02 (3)
                  • Re: Throwing Chains - Poor Paul 00:29:54 07/21/02 (2)
                    • Re: Throwing Chains - Phil 07:19:21 07/21/02 (1)
                      • Derailer adjusrment - Jim 08:45:43 07/21/02 (0)
              • Carbon fork v. Shock - Dan 13:00:38 07/19/02 (3)
                • Re: Carbon fork v. Shock - kevin 13:16:41 07/19/02 (2)
                  • Another option - Jim 18:16:22 07/19/02 (1)
                    • Yet another - Robert 05:36:29 07/22/02 (0)
              • New Campy freehub body service - David Feldman 11:23:06 07/19/02 (1)
                • Re: New Campy freehub body service - Robert 05:21:55 07/22/02 (0)
              • Stem Measures - Pat Kelly 09:46:43 07/19/02 (2)
                • Re: Stem Measures - Robert 05:18:16 07/22/02 (0)
                • Re: Stem Measures - Jim 18:11:01 07/19/02 (0)
              • installing SPD-R cleat - RJ 23:18:06 07/18/02 (1)
                • Re: installing SPD-R cleat - Cyco 03:50:37 07/20/02 (0)
              • creeking bb - Jon 23:07:36 07/18/02 (3)
                • Re: creeking bb - Jeremy 00:10:45 07/31/02 (0)
                • Re: creeking bb - Cyco 06:49:25 07/19/02 (1)
                  • Re: creeking bb - tedt 18:52:49 08/28/02 (0)
              • Ti frame Finish - Don Asay 01:21:49 07/18/02 (2)
                • Re: Ti frame Finish - Phil 07:30:11 07/21/02 (0)
                • Re: Ti frame Finish - dave 16:07:19 07/18/02 (0)
              • EXXON GRAFTEK SIZES - Paul Jordan 14:59:51 07/17/02 (4)
                • Re: EXXON GRAFTEK SIZES - Robert 05:08:15 07/22/02 (3)
                  • Re: EXXON GRAFTEK SIZES - richard 12:18:54 08/01/02 (2)
                    • Re: EXXON GRAFTEK SIZES - graftex 23:30:12 04/15/03 (0)
                    • Re: EXXON GRAFTEK SIZES - Graftex 23:02:38 04/15/03 (0)
              • Shimano 600 Group - Joe Martin 16:04:06 07/16/02 (2)
                • Re: Shimano 600 Group - Jim 18:11:49 07/16/02 (1)
                  • Re: Shimano 600 Group - John 12:31:19 07/17/02 (0)
              • gasoline engine on bike - Waldbauer 15:55:55 07/15/02 (6)
                • Re: gasoline engine on bike - M. S. Prochaska 15:44:03 05/05/03 (0)
                • Re: gasoline engine on bike - Phil 06:35:32 07/21/02 (1)
                  • engine mount - wesley 06:36:53 08/01/03 (0)
                • Re: gasoline engine on bike - Robert 06:28:29 07/16/02 (2)
                  • Re: gasoline engine on bike - Calvin Jones-Park Tool 14:51:15 07/16/02 (1)
                    • Re: gasoline engine on bike - hdavidk 14:53:49 08/15/02 (0)
              • Locker - Emedi Pablo-George 08:25:34 07/14/02 (1)
                • Re: Locker - Robert 06:23:36 07/16/02 (0)
              • rebuilding Campy derailleur - David Duncan 18:24:42 07/13/02 (3)
                • Re: rebuilding Campy derailleur - Robert 05:47:26 07/14/02 (2)
                  • Re: rebuilding Campy derailleur - Randy Shoquist 23:32:33 07/14/02 (1)
                    • wezu ngmx - zuetg svjfgpdez 08/07/06 (0)
              • Servicing Cartridge Bearings - Paul H 14:22:10 07/13/02 (5)
                • Re: Servicing Cartridge Bearings - Phil 08:01:20 07/21/02 (2)
                  • Re: Servicing Cartridge Bearings - matthew dunn 10:36:25 02/06/04 (1)
                    • Re: Servicing Cartridge Bearings - tullio 11/06/04 (0)
                • Re: Servicing Cartridge Bearings - Damian 19:16:24 07/16/02 (0)
                • Re: Servicing Cartridge Bearings - Damian 18:55:21 07/16/02 (0)
              • RSX components weight - jean claude 13:49:30 07/13/02 (1)
                • Re: RSX components weight - jim milehibiker80124@aol.com 15:30:52 07/13/02 (0)
              • heres a pathetic question - Ryan 13:34:33 07/13/02 (1)
                • Re: heres a pathetic question - jean 13:58:30 07/13/02 (0)
              • Shockster suspension - Bruce 12:22:15 07/13/02 (1)
                • Re: Shockster suspension - Gordon Teifel 14:11:24 10/21/02 (0)
              • shorten carbon bar - Paul H 15:11:13 07/12/02 (1)
                • Re: shorten carbon bar