United Bicycle Institute TECHNICAL FORUM UBI Main Page UBI Courses and Schedules Feel free to post a technical question! Also feel free to answer existing questions if you feel qualified to do so. Our search engine can also peruse hundreds of archived postings to find what you are looking for. This is an open forum - opinions expressed here are not necessarily those of United Bicycle Institute. There are currently over 13082 technical postings in the forum! The latest was added on 11/23/06. While visiting this site, please take our weekly online survey regarding the bicycle industry. Search: Match all words Match any word Match exact phrase Archived Years:   1997    1998    1999    2000    2001    2002    2003    2004    2005    2006

• Hiawatha - Yooperjb 12/23/05 (0)
• campy pedal adjustment - Russell 12/22/05 (0)
• Campy rear derailleur - Dennis 12/17/05 (1)
  • Re: Campy rear derailleur - Jon 01/05/06 (0)
• Sram pg 950 - 970 - Alex Ready 12/15/05 (0)
• Bottom Bracket Availability - Hank Marshall 12/14/05 (2)
  • Re: Bottom Bracket Availability - Robert 12/16/05 (0)
  • Re: Bottom Bracket Availability - JoJo 12/15/05 (0)
• 9 spd vs. 10 speed - sam 12/10/05 (2)
  • Re: 9 spd vs. 10 speed - Bill 01/06/06 (0)
  • Re: 9 spd vs. 10 speed - Rob 12/12/05 (0)
• Fork Failure - Rob 12/07/05 (6)
  • Re: Fork Failure - Rudy 12/20/05 (0)
  • Re: Fork Failure - Robert 12/07/05 (4)
    • Re: Fork Failure - John Hutchinson 07/14/06 (0)
    • Re: Fork Failure - John Hutchinson 07/14/06 (0)
    • Re: Fork Failure - liability issues? - Al 12/10/05 (1)
      • Re: Fork Failure - liability issues? - Dave 01/21/06 (0)
• Stripped Dropout - Yeti 12/05/05 (5)
  • Re: Stripped Dropout - Yeti 12/05/05 (4)
    • Re: Stripped Dropout - Al 12/05/05 (3)
      • Re: Stripped Dropout - john 12/05/05 (2)
        • Re: Stripped Dropout - Yeti 12/07/05 (1)
          • Re: Stripped Dropout - Al 12/10/05 (0)
• 10 speed shifters - wallace 12/04/05 (2)
  • Re: 10 speed shifters - Rob 12/05/05 (1)
    • Re: 10 speed shifters - alternate cable routing - Al 12/05/05 (0)
• specialized cross frame - craig heihn 11/29/05 (0)
• Rear Derailler - Mike 11/28/05 (4)
  • Re: Rear Derailler - Joakim 12/01/05 (0)
  • Re: Rear Derailler - mike 11/29/05 (1)
    • Re: Rear Derailler - it's all good - Al 11/29/05 (0)
  • Re: Rear Derailler - Al 11/29/05 (0)
• xtr disc caliper - niglet 11/22/05 (2)
  • Re: xtr disc caliper - Jeremy 12/20/05 (1)
    • Re: xtr disc caliper - Eric Shih 12/23/05 (0)
• Rear Derailleur Mounting - Scott Baxter 11/14/05 (4)
  • Re: Rear Derailleur Mounting - Scott Baxter 11/24/05 (0)
  • Re: Rear Derailleur Mounting - joey 11/16/05 (0)
• Stripped Bottom Bracket threads - Jerry 11/14/05 (5)
  • Re: Stripped Bottom Bracket threads - Steven 11/29/05 (0)
  • Re: Stripped Bottom Bracket threads - Glen 11/28/05 (0)
  • Re: Stripped Bottom Bracket threads - Glen 11/28/05 (0)
  • Re: Stripped Bottom Bracket threads - j 11/27/05 (0)
  • Re: Stripped Bottom Bracket threads - Al 11/16/05 (0)
• thread tolerance - joey 11/14/05 (2)
  • Re: thread tolerance - Al 11/14/05 (1)
    • Re: thread tolerance - Malviya 09/04/06 (0)
• Bottom bracket - Marc Buchan 11/13/05 (4)
  • Re: Bottom bracket - Rob 11/13/05 (3)
    • Re: Bottom bracket - Mike 08/01/06 (0)
    • Re: Bottom brackets - Al 11/14/05 (1)
      • Re: Bottom brackets...threading - Jim 11/14/05 (0)
• Look Carbon frame problem...need help! - Kevin 11/11/05 (6)
  • Re: Look Carbon frame problem...don't panic! - Al 11/14/05 (4)
  • Re: Look Carbon frame problem...need help! - Jim 11/11/05 (0)
• Stripping Paint off bike - Yeti 11/10/05 (17)
  • - 11/07/06 (0)
  • Re: Stripping Paint off bike - gggsg 05/31/06 (0)
  • Re: Stripping Paint off bike - Frank 05/25/06 (0)
  • Re: Stripping Paint off bike - Alex 02/19/06 (0)
  • Re: Stripping Paint off bike - William Ford 02/12/06 (0)
  • Re: Stripping Paint off bike - mr. dizzle 12/01/05 (1)
    • Re: Stripping Paint off bike - Thomas Seidl 05/19/06 (0)
  • Re: Stripping Paint off bike - Rob 11/11/05 (0)
  • Re: Stripping Paint off bike - lilogs 11/10/05 (8)
    • Re: Stripping Paint off bike - ass 08/23/06 (0)
    • Re: Stripping Paint off bike - choco 06/12/06 (0)
    • Re: Stripping Paint off bike - ttgfttghjkhgtfd 06/11/06 (0)
    • Re: Stripping Paint off bike - ttgfttghjkhgtfd 06/11/06 (0)
    • Re: Stripping Paint off bike - Vijay Badade 06/09/06 (0)
    • Re: Stripping Paint off bike - R 02/28/06 (0)
    • Re: Stripping Paint off bike - Yeti 11/10/05 (0)
    • Re: Stripping Paint off bike - Yeti 11/10/05 (0)
• Shimano cranks campy drivetrain - Jane 11/09/05 (2)
  • Re: Shimano cranks campy drivetrain - Rob 11/11/05 (0)
  • Re: Shimano cranks campy drivetrain - Al 11/09/05 (0)
• cold setting 531 - Ed 11/09/05 (7)
  • Re: cold setting 531 - Tony Narkowicz 12/10/05 (0)
  • Re: cold setting 531 - Lilogs 11/09/05 (3)
    • Re: cold setting 531 - Nate Peterson 08/21/06 (0)
    • Re: cold setting 531 - Ed 11/13/05 (1)
      • Re: cold setting 531 - FWIW - Al 11/14/05 (0)
• building small bike - Aban 11/08/05 (2)
  • Re: building small bike - Rob 11/12/05 (1)
    • Re: building small bike - Al 11/14/05 (0)
• Campagnolo cassette changes - Steve 11/03/05 (1)
  • Re: Campagnolo cassette changes - Al 11/05/05 (0)
• Stripped Crank - Yeti 11/02/05 (2)
  • Re: Stripped Crank - Jim 11/02/05 (1)
    • Re: Stripped Crank - Glen 11/28/05 (0)
• 1 1/8" headset 1" Fork - mark 11/01/05 (4)
  • Re: 1 1/8" headset 1" Fork - bill jackson 11/02/05 (3)
    • Re: 1 1/8" headset 1" Fork - Jin 11/02/05 (2)
      • Re: 1 1/8" headset 1" Fork - Wayne 12/19/05 (1)
        • Re: 1 1/8" headset 1" Fork -- BMX - Al 02/09/06 (0)
• lug vice - david j 10/28/05 (1)
  • Re: lug vice - Jay 11/01/05 (0)
• Seized seat post - Scott 10/27/05 (5)
  • Re: Seized seat post - dan 03/03/06 (0)
  • Re: Seized seat post - Wil 11/21/05 (1)
    • - 11/07/06 (0)
  • Re: Seized seat post - Tysen 11/11/05 (0)
• Threaded Fork Help - steelciocc 10/22/05 (6)
  • Re: Threaded Fork Help - Al 10/23/05 (5)
    • Re: Threaded Fork Help - lilogs 10/23/05 (4)
      • Re: Threaded Fork Help - Al 10/23/05 (3)
        • Europe News - EuropeNews98 10/21/06 (0)
        • Re: Threaded Fork Help - lilogs 10/26/05 (1)
          • Re: Threaded Fork Help - Al 10/26/05 (0)
• Nervar Crank Extractor - Gary 10/22/05
• Upgrade 9 to 10 speed, does width matter? - WingNut 10/18/05 (3)
  • Re: Upgrade 9 to 10 speed, does width matter? - federal agent 10/27/05 (1)
    • Re: lug vice - Jay 11/01/05 (0)
  • Re: Upgrade 9 to 10 speed, does width matter? - Al 10/18/05 (1)
    • Re: Upgrade 8 to 10 speed - Jeff 08/14/06 (0)
• Campag hub cassette advice - WingNut 10/18/05 (3)
  • Re: Campag hub cassette advice - Al 10/18/05 (1)
    • Campag hub cassette advice - Chris Kearney 10/18/06 (0)
  • Re: Campag hub cassette advice - abdou 10/18/05 (0)
• anodized spokes - Logan 10/16/05 (4)
  • Re: anodized spokes - Reaction 10/10/06 (0)
  • Re: anodized spokes - Brine 12/03/05 (0)
  • Re: anodized spokes - j 11/27/05 (0)
  • Re: anodized spokes - Al 10/18/05 (0)
• Crank Length - Billy 10/16/05 (1)
  • Re: Crank Length - Al 10/18/05 (0)
• 120mm hollow axles - Clint 10/14/05 (1)
  • Re: 120mm hollow axles - Al 10/14/05 (0)
• Loose fork crown race - Ed 10/13/05 (4)
  • Re: Loose fork crown race - lilogs 10/13/05 (3)
    • Re: Loose fork crown race - Ed 10/16/05 (2)
      • Re: Loose fork crown race - james 12/11/05 (0)
      • Re: Loose fork crown race - james 12/11/05 (0)
• wheel building - donley 10/10/05 (1)
  • Re: wheel building - Al 10/10/05 (1)
    • Re: re spray a dragster bicycle - simon 11/03/05 (0)
• bottom bracket axle off balance - Shane 10/09/05 (3)
  • Re: bottom bracket axle off balance - Al 10/10/05 (2)
    • Re: bottom bracket axle off balance - Shane 10/12/05 (1)
      • Re: bottom bracket axle off balance - lilogs 10/14/05 (0)
• top pull cable routing pulley clamp - John M 10/07/05 (3)
  • Re: top pull cable routing pulley clamp - doug 02/04/06 (0)
  • Re: top pull cable routing pulley clamp - lilogs 10/09/05 (1)
    • Re: top pull cable routing pulley clamp - John M 10/10/05 (0)
• strong touring rim - Ed 10/05/05 (5)
  • Re: strong touring rim - doug 02/04/06 (1)
    • Re: strong touring rim - doug 02/04/06 (0)
  • Re: strong touring rim - Al 10/07/05 (2)
    • Re: strong touring rim - Ed 10/16/05 (0)
    • Re: strong touring rim - Ed 10/13/05 (0)
• 9 speed chain life - Ed 10/04/05 (4)
  • Re: 9 speed chain life - John P 10/22/05 (0)
  • Re: 9 speed chain life - jp10jp 10/22/05 (0)
  • Re: 9 speed chain life - redwrench 10/07/05 (0)
  • Re: 9 speed chain life - Jim 10/04/05 (0)
• stripped bottom bracket removal - Michael 10/01/05 (2)
  • Re: stripped bottom bracket removal - Rob 10/05/05 (1)
    • Re: stripped bottom bracket removal - Al 10/07/05 (0)
• help me solve my fork problem. - todd olsen 09/27/05 (1)
  • Re: help me solve my fork problem. - Al 09/27/05 (0)
• Creaky Seatpost - tony march 09/26/05 (3)
  • Re: Creaky Seatpost - j 11/27/05 (0)
  • Re: Creaky Seatpost - Al 09/27/05 (1)
    • Re: Creaky Seatpost - Al 11/04/05 (0)
• # of trim positions for Dura-Ace 10 front derailleur? - Richard 09/24/05 (2)
  • Re: instructions - Jim 09/24/05 (0)
  • Re: # of trim positions for Dura-Ace 10 front derailleur? - Jim 09/24/05 (0)
• 11-32/11-34 swop? - sally 09/24/05 (2)
  • swop ? you mean swap. - sp 10/09/05 (0)
  • Re: 11-32/11-34 swop? - Al 09/25/05 (0)
• chain jump - john 09/22/05 (6)
  • Re: chain jump - agd 10/06/05 (0)
  • Re: chain jump - Rob 09/24/05 (0)
  • Re: connex link - Jim 09/22/05 (1)
    • Re: connex link - john 09/23/05 (0)
  • Re: chain jump - Al 09/22/05 (1)
    • Re: chain jump - Jim 09/22/05 (0)
• Ultegra Shifter parts - Jonathan 09/17/05 (4)
  • Re: Ultegra Shifter parts - tool boy 09/20/05 (2)
    • Re: Ultegra Shifter parts - Jonathan 09/20/05 (1)
      • Re: Ultegra Shifter parts - Rob 09/26/05 (0)
• barcon shifters on an RB-1 - ted 09/12/05 (2)
  • Re: barcon shifters on an RB-1 - tool boy 09/20/05 (0)
  • Re: barcon shifters on an RB-1 - Al 09/12/05 (0)
• inbound spoke lacing - mc 09/08/05 (2)
  • Re: inbound spoke lacing - Al 09/10/05 (1)
    • Re: inbound spoke lacing - mc 09/11/05 (0)
• One Legged Crank - James Burris 09/08/05 (4)
  • Re: One Legged Crank - Dave Minter 12/18/05 (0)
  • Re: One Legged Crank - Al 09/12/05 (2)
    • Re: One Legged Crank - James Burris 09/14/05 (1)
      • Re: One Legged Crank - Norman 11/19/05 (0)
• chain rub - jay 09/04/05 (1)
  • Re: chain rub - Al 09/10/05 (0)
• Files - Cyndi-Alliena 09/03/05 (2)
  • Re: Files - Al 09/03/05 (1)
    • Re: Files - Cyndi-Alliena 09/05/05 (0)
• the ultimate winter bike! - Logan 09/03/05 (7)
  • Re: the ultimate winter bike! - chickenlegs 01/22/06 (0)
  • Re: the ultimate winter bike! - joe 11/03/05 (1)
    • Re: the ultimate winter bike! - Joe 11/03/05 (0)
  • Re: the ultimate winter bike! - eric 09/27/05 (0)
  • Re: the ultimate winter bike! - seth 09/03/05 (1)
    • Re: the ultimate winter bike! - tool boy 09/20/05 (0)
  • Re: the ultimate winter bike! - Al 09/03/05 (0)
• inch pitch track cog - seth sypko 09/02/05 (0)
• fine tuning shifting - gio 09/01/05 (3)
  • Re: fine tuning shifting - Al 09/01/05
  • Dura-ace chainline defies Sheldon Brown's specs? - Aaron 08/31/05 (2)
    • Re: Dura-ace chainline defies Sheldon Brown's specs? - Al 08/31/05 (1)
      • Re: Dura-ace chainline defies Sheldon Brown's specs? - Aaron 09/02/05 (0)
  • What product is available to convert a Shimano XTR crankset to a single-speed setup? - Johnny Leavy 08/27/05 (2)
    • Re: What product is available to convert a Shimano XTR crankset to a single-speed setup? - Kurt Cranford 09/03/05 (0)
    • Re: What product is available to convert a Shimano XTR crankset to a single-speed setup? - Al 08/30/05 (0)
  • 29er wheels/rims - Dave. 08/24/05 (2)
    • Re: 29er wheels/rims - Al 08/30/05 (1)
      • Re: 29er wheels/rims - Dave. 08/31/05 (0)
  • wheel tension meter - sam markovich 08/23/05 (3)
    • Re: wheel tension meter - Jordi 09/07/05 (0)
    • Re: wheel tension meter - Rob 09/01/05 (0)
    • Re: wheel tension meter - Al 08/30/05 (0)
  • chain tools - sam markovich 08/23/05 (2)
    • Re: chain tools - Jim 08/24/05 (1)
      • Re: chain tools - hans 10/14/05 (0)
  • Update wanted on current model Ego Cycle 2 (Ego-2, Ego-II) electric scooters. - Neil 08/19/05 (1)
    • - 11/07/06 (0)
  • seatpost setback - dale 08/11/05 (2)
    • Re: seatpost setback - Al 08/12/05 (1)
      • Re: seatpost setback - Steve B. 09/04/05 (0)
  • post weld heat treatment - Larry 08/10/05 (9)
    • Re: post weld heat treatment - hossein 05/27/06 (0)
    • Re: post weld heat treatment - khalid 04/25/06 (0)
    • what is post weld. We are bidding a project that is calling for post weld treatment for installed piping. Can you explain what they are asking for. - Rance Brown 03/29/06 (0)
    • Re: post weld heat treatment - Murat 12/27/05 (0)
    • Re: post weld heat treatment - pol 09/16/05 (0)
    • Re: post weld heat treatment - mitu patel 08/30/05 (0)
    • Re: post weld heat treatment - Jim 08/10/05 (2)
      • Re: post weld heat treatment - oggie 08/11/05 (1)
        • Re: post weld heat treatment of 34MONICR6 - Rui 11/27/05 (0)
  • Dura Ace ft der - Frankie 08/09/05 (1)
    • Re: Dura Ace ft der - Jim 08/10/05 (0)
  • Ultegra 10 triple rub - Jane 08/08/05 (5)
    • Re: Ultegra 10 triple rub - Jim 08/08/05 (4)
      • Re: Ultegra 10 triple rub - Jane 08/08/05 (3)
        • Re: chainstay length - Jim 08/09/05 (2)
          • Re: chainstay length - Al 08/12/05 (1)
            • Re: chainstay length - David Feldman 09/02/05 (0)
  • 9 to 10 speed - Brett 08/07/05 (4)
    • Re: 9 to 10 speed - Rob 09/01/05 (0)
    • Re: 9 to 10 speed - Rob 08/09/05 (1)
      • Re: spacer - Jim 08/10/05 (0)
    • Re: 9 to 10 speed - Jim 08/07/05 (0)
  • campy to shimano - Brett 08/05/05 (2)
    • Re: campy to shimano - Robert 08/09/05 (0)
    • Re: campy to shimano - Jim 08/05/05 (0)
  • re spray a dragster bicycle - dominic 08/05/05 (15)
    • give up mate ur bike is gonna be shit - batman 05/14/06 (1)
      • Re: give up mate ur bike is gonna be shit - u are shit 08/18/06 (0)
    • Re: re spray a dragster bicycle - batman 05/14/06 (0)
    • Re: re spray a dragster bicycle - tom 03/31/06 (1)
      • Re: re spray a dragster bicycle - tom griffin 06/29/06 (0)
    • Re: re spray a dragster bicycle - tom 03/31/06 (3)
      • Re: re spray a dragster bicycle - rambo 07/25/06 (0)
      • Re: re spray a dragster bicycle - tom griffin 06/26/06 (1)
        • Re: re spray a dragster bicycle - gaz p 11/07/06 (0)
    • Re: re spray a dragster bicycle - chubs 12/20/05 (0)
    • Re: re spray a dragster bicycle - darryl 10/12/05 (0)
    • Re: re spray a dragster bicycle - Ashley 10/11/05 (1)
      • Re: re spray a dragster bicycle - simon 11/03/05 (0)
    • Re: re spray a dragster bicycle - Dave 10/10/05 (0)
    • Re: re spray a dragster bicycle - jake napier 09/25/05 (0)
  • Columbus Decals - Kevin Grady 08/03/05 (1)
    • Re: Columbus Decals - Ed 10/05/05 (0)
  • Recable - Nate 07/31/05 (3)
    • Re: Recable - Jim 08/02/05 (0)
    • Re: Recable - Al 08/01/05 (0)
    • Re: Recable - Nate 07/31/05 (0)
  • Bottom Bracket Removal - Matthew 07/30/05 (6)
    • Re: Bottom Bracket Removal - alan Mcleod 08/13/06 (0)
    • Re: Bottom Bracket Removal - alan Mcleod 08/13/06 (0)
    • Re: Bottom Bracket Removal - Jim 07/30/05 (3)
      • Re: Bottom Bracket Removal - Matthew 07/30/05 (2)
        • Re: Bottom Bracket Removal - Al 07/30/05 (1)
          • Re: Bottom Bracket Removal 2 - Matthew 07/30/05 (0)
  • path of rear wheel - matt 07/29/05 (0)
  • Replace head tube on steel frame - Will 07/29/05 (2)
    • Re: Replace head tube on steel frame - Rob 08/09/05 (0)
    • Re: Replace head tube on steel frame - jo 07/30/05 (0)
  • tubular cement remover - David J 07/28/05 (3)
    • Re: tubular cement remover - Al 07/29/05 (2)
      • Re: tubular cement remover - justin karbel 03/04/06 (0)
      • Re: tubular cement remover - David J 07/29/05 (0)
  • 95 Proflex Arcadia - Greg 07/27/05 (4)
    • Re: 95 Proflex Arcadia - Steve 12/10/05 (0)
    • Re: 95 Proflex Arcadia - Pat patterson 10/26/05 (0)
    • Re: 95 Proflex Arcadia - Al 08/30/05 (1)
      • Re: 95 Proflex Arcadia - Cat 12/12/05 (0)
  • bottom bracket replacement - Scott M 07/23/05 (3)
    • Re: bottom bracket replacement - Scott Ward 07/26/05 (0)
    • Re: bottom bracket replacement - Al 07/23/05 (0)
    • Re: bottom bracket replacement - Jim 07/23/05 (0)
  • 9 sp. front Derailleur with 8 speed system - Markus 07/19/05 (6)
    • Re: 9 sp. front Derailleur with 8 speed system - Markus 07/26/05 (0)
    • Re: 9 sp. front Derailleur with 8 speed system - GrumpyOldWrench 07/20/05 (0)
    • Re: 9 sp. front Derailleur with 8 speed system - Al 07/19/05 (3)
      • Re: 9 sp. front Derailleur with 8 speed system - lilogs 07/21/05 (2)
        • Re: Chain width. - Jim 07/22/05 (1)
          • Re: Chain width. - lilogs 07/23/05 (0)
  • Uniglide chain? - DaveH 07/18/05 (10)
    • Re: Uniglide chain? - Jim 07/18/05 (9)
      • Re: Uniglide chain? - richie 07/18/05 (8)
        • Re: Cassette wear - Jim 07/18/05 (7)
          • Re: Cassette wear - richie 07/19/05 (0)
          • Re: Cassette wear - UBI Administrator 07/19/05 (2)
            • Re: Point taken. - Jim 07/19/05 (1)
              • Re: Point taken. - UBI Administrator 07/19/05 (0)
          • Re: Cassette wear...more - Jim 07/18/05 (2)
            • Re: Cassette wear...more - DaveH 07/19/05 (1)
              • Re: Cassette ...uniglide - Jim 07/20/05 (0)
  • RaceFace crank - Jeff Serna 07/17/05 (1)
    • Re: RaceFace crank - Al 07/18/05 (0)
  • a tough bag for bicycle - Daniel Jabes 07/16/05 (2)
    • Re: a tough bag for bicycle - Al 07/16/05 (1)
      • Re: a tough bag for bicycle - richie 07/18/05 (0)
  • bontrager wheels - dale 07/15/05 (8)
    • Re: bontrager wheels - McCord 08/05/05 (0)
    • Re: bontrager wheels - Scott Ward 07/26/05 (2)
      • Re: bontrager wheels - J. Marvin Campbell 01/15/06 (0)
      • Re: bontrager wheels - J. Marvin Campbell 01/15/06 (0)
    • Re: bontrager wheels - Rob 07/22/05 (0)
    • Re: bontrager wheels - Dan Kragthorpe 07/15/05 (2)
      • Re: bontrager wheels - richie 07/18/05 (1)
        • Re: bontrager wheels - anon@trekbikes.com 03/01/06 (0)
  • seat post - Lynn 06/29/05 (1)
    • Re: seat post - Scott Ward 07/26/05 (0)
  • campy cassette & chain - BP 06/27/05 (13)
    • Re: campy cassette & chain - richie 07/18/05 (0)
    • Re: campy cassette & chain - Tony Narkowicz 06/28/05 (11)
      • Re: campy cassette & chain - Al 06/28/05 (10)
        • Re: Chain wear - Jim 06/28/05 (3)
          • Re: Chain wear - Al 06/28/05 (2)
            • Re: Chain wear - trekrat 07/12/05 (1)
              • Re: Chain wear - Jim 07/12/05 (0)
        • Re: campy cassette & chain - Jim 06/28/05 (5)
          • Re: Lose the Attitude - UBI Administrator 06/29/05 (2)
          • Re: campy cassette & chain - Al 06/28/05 (1)
            • Re: cog spacing. - Jim 07/12/05 (0)
  • Campy BB - Still all ISO Taper? - Tony Narkowicz 06/27/05 (4)
    • Re: Campy BB - Still all ISO Taper? - sukhwinder 07/23/05 (0)
    • Re: Campy BB - Still all ISO Taper? - Al 06/27/05 (2)
      • Re: Campy BB - Still all ISO Taper? - Paul marvin 01/13/06 (0)
      • Re: Campy BB - Still all ISO Taper? - Paul marvin 01/13/06 (0)
  • Giant ATX870 - simon 06/25/05 (1)
    • Re: Giant ATX870 - Al 06/25/05 (0)
  • which 8 speed chain for a 9 speed setup? - Ed 06/23/05 (6)
    • Re: which 8 speed chain for a 9 speed setup? - Jim 06/24/05 (5)
      • Re: which 8 speed chain for a 9 speed setup? - Ed. 06/25/05 (4)
        • Re: Apparently, I can's say this often enough! - Al 06/25/05 (3)
          • Re: Turn the comprehension switch to on - Jim 06/26/05 (2)
            • Re: OBVIOUSLY, I can't say this often enough! - Al 06/27/05 (1)
              • Re: Keeping track - Jim 06/27/05 (0)
  • Ultegra Dual Shifter - Angus 06/22/05 (1)
    • Re: Ultegra Dual Shifter - Al 06/22/05 (0)
  • getting cogs off a freewheel - Ed 06/12/05 (6)
    • Re: getting cogs off a freewheel - Pete Jacobsen 06/12/05 (5)
      • Re: getting cogs off a freewheel - Frank Parkes 05/11/06 (0)
      • Re: getting cogs off a freewheel - Ed 06/13/05 (3)
        • Re: getting cogs off a freewheel - Al 06/13/05 (2)
          • Re: getting cogs off a freewheel - Kelly 11/12/05 (0)
          • Re: getting cogs off a freewheel - Ed 06/13/05 (0)
  • 9sp chainrings special? - Ed 06/12/05 (6)
    • Re: 9sp chainrings special? - Pete Jacobsen 06/12/05 (5)
      • Re: 9sp chainrings special? - Ed 06/13/05 (4)
        • Re: Once more, into the breech ... - Al 06/13/05 (3)
          • Re: Once more, into the breech ... - Ed 06/13/05 (1)
            • Re: Once more, into the breech ... - Al 06/13/05 (0)
          • Re: Once more, into the breech ... - Ed 06/13/05 (0)
  • 9sp cassette with 8sp freehub? - Edward Swash 06/12/05 (2)
    • Re: 9sp cassette with 8sp freehub? - Al 06/13/05 (1)
      • Re: 9sp cassette with 8sp freehub? - Ed 06/13/05 (0)
  • grip shifter on road bars - Dave. 06/09/05 (2)
    • Re: grip shifter on road bars - Al 06/10/05 (1)
      • Re: grip shifter on road bars - errata - Al 06/10/05 (0)
  • bearings - jacob 06/08/05 (0)
  • Those skimpily spoked wheels - Pete Jacobsen 06/07/05 (7)
    • Re: Those skimpily spoked wheels - Al 06/08/05 (6)
      • Re: Those skimpily spoked wheels - Pete Jacobsen 06/09/05 (1)
        • Re: Those skimpily spoked wheels - Al 06/09/05 (0)
      • Re: Those skimpily spoked wheels - spencer 06/09/05 (3)
        • Re: Those skimpily spoked wheels - Al 06/09/05 (2)
          • Re: Those skimpily spoked wheels - oggie 06/10/05 (1)
            • Re: Those skimpily spoked wheels - Al 06/13/05 (0)
  • Litespeed fork rake - Kevin 06/03/05 (6)
    • Re: Litespeed fork rake - Kevin 06/04/05 (0)
    • Re: Litespeed fork rake - richie 06/03/05 (3)
      • Re: Litespeed fork rake - Scott Ward 07/26/05 (2)
        • Re: Litespeed fork rake - André 11/09/05 (0)
        • Re: Litespeed fork rake - André 11/09/05 (0)
    • Re: Litespeed fork rake - Al 06/03/05 (0)
  • SRAM & Shimano Brifter Help - J W S 3 06/02/05 (2)
    • Re: SRAM & Shimano Brifter Help - Al 06/02/05 (1)
      • Re: SRAM & Shimano Brifter Help - JWS3 06/02/05 (0)
  • FSA integrated headset - Ryan 05/25/05 (3)
    • Re: FSA integrated headset - Sam 06/09/05 (0)
    • Re: FSA integrated headset - Jim 05/29/05 (0)
    • Re: FSA integrated headset - Al 05/28/05 (0)
  • Homegrown geometry - Mike 05/15/05 (1)
    • Re: Homegrown geometry - FWIW - Al 05/16/05 (0)
  • Cog spacing on a cassette - Dave. 05/14/05 (2)
    • Re: Cog spacing on a cassette - Al 05/14/05 (1)
      • Re: derailers - Jim 05/15/05 (0)
  • XT Derailleur Hitting Spokes - Kevin 05/14/05 (7)
    • Re: XT Derailleur Hitting Spokes - Al 05/14/05 (6)
      • Re: XT Derailleur Hitting Spokes - Kevin 05/14/05 (5)
        • Re: XT Derailleur Hitting Spokes - Al 05/14/05 (4)
          • Re: XT Derailleur Hitting Spokes - Kevin 05/15/05 (3)
            • Re: XT Derailleur Hitting Spokes - Al 05/16/05 (2)
              • Re: XT Derailleur Hitting Spokes - Aarron 05/29/05 (0)
  • Spinner Suspension Fork - Tim McCoy 05/12/05 (0)
  • Dura Ace SPD binding wear - Tony Narkowicz 05/12/05 (3)
    • Re: Dura Ace SPD binding wear - glenn Fenlason 05/13/05 (2)
      • Re: Dura Ace SPD binding wear - Tony Narkowicz 05/16/05 (1)
        • Re: Dura Ace SPD binding "repair" - Al 05/16/05 (0)
  • Suntour XC comp w/9 speed - dm-penzance-uk 05/11/05 (0)
  • Suntour RD Compatibility - Kerry 05/11/05 (1)
    • Re: Suntour RD Compatibility - Jim 05/12/05 (0)
  • Tires/Tubes - drew 05/11/05 (3)
    • Re: Tires/Tubes - Al 05/28/05 (0)
    • Re: Tires/Tubes - J.E.T. 05/22/05 (1)
      • Re: Tires/Tubes - dave 06/05/05 (0)
  • DT Proline Washers - Spencer Wright 05/11/05 (2)
    • Re: DT Proline Washers - Tom Haanen 06/30/06 (0)
    • Re: DT Proline Washers - Francis Ranwez 05/29/05 (0)
  • shogun selectra for sale - dominic kieler 05/09/05 (0)
  • Ultegra ft der crap, er...clamp - Ronny 05/06/05 (4)
    • Re: adapter...clamp - Jim 05/06/05 (0)
    • Re: Ultegra ft der crap, er...clamp - Al 05/06/05 (2)
      • Re: Ultegra ft der crap, er...clamp - Jim 05/06/05 (1)
        • Re: Ultegra ft der crap, er...clamp - Ronny 05/07/05 (0)
  • Shimano cassette - Bugsy 05/05/05 (3)
    • Re: Shimano cassette - Al 05/06/05 (2)
      • Re: BTW - Al 05/06/05 (1)
        • Re: BTW - Randal 05/07/05 (0)
  • nexus SG-7C16 - disable brake? - nick 05/05/05 (4)
    • Re: nexus SG-7C16 - disable brake? - Al 05/05/05 (3)
      • Re: nexus SG-7C16 - disable brake? - nick 05/05/05 (2)
        • Re: nexus SG-7C16 - disable brake? - Bob 12/09/05 (1)
          • Re: nexus SG-7C16 - disable brake? - adam 01/01/06 (0)
  • old down tube shifters -new frame - jeff green 04/30/05 (3)
    • Re: old down tube shifters -new frame - Al 05/05/05
    • Re: old down tube shifters -new frame - Jim 04/30/05 (0)
  • Cable Housing. - Randal 04/22/05 (0)
  • XT Crankset 8 speed - Rob 04/20/05 (1)
    • Re: XT Crankset 8 speed - Al 04/22/05 (0)
  • Cassette Concerns - Randal 04/18/05 (5)
    • Re: Cassette Concerns - Al 04/18/05 (4)
      • Re: Cassette Concerns - Randal 04/19/05 (3)
        • Re: BTW - Cassette Concerns - Al 04/20/05 (2)
          • Re: BTW - Cassette Concerns - Randal 04/20/05 (1)
  • 14mm Hub 3/8 axle - A 04/13/05 (7)
    • Re: 14mm Hub 3/8 axle - a were 10/19/06 (0)
    • Re: 14mm Hub 3/8 axle - Randall 03/01/06 (0)
    • Re: 14mm Hub 3/8 axle - bob frank 02/24/06 (0)
    • Re: 14mm Hub 3/8 axle - Chris 04/23/05 (0)
    • Re: 14mm Hub 3/8 axle - Al 04/15/05 (2)
      • Re: BTW - Al 04/16/05 (1)
        • Re: BTW - Ron B. 05/31/05 (0)
  • Ultegra Brake Question - tonymarch 04/12/05 (1)
    • Re: Ultegra Brake Question - Al 04/15/05 (0)
  • Only getting 3of9 gears on rear - David L 04/08/05 (2)
    • Re: Only getting 3of9 gears on rear - colin 04/11/05 (0)
    • Re: Only getting 3of9 gears on rear - jojo 04/11/05 (0)
  • Deda compact cranks - Paul 04/07/05 (3)
    • Re: Deda compact cranks - Al 04/07/05 (2)
      • Re: Deda compact cranks - Jim 04/07/05 (1)
        • Re: there you go, again! - Al 04/15/05 (0)
  • Compact Rr shifting issues - Sclarb 03/25/05 (7)
    • Re: Compact Rr shifting issues - Robert 03/31/05 (0)
    • Re: Compact Rr shifting issues - richie 03/28/05 (2)
      • Re: Compact Rr shifting - Jim 03/29/05 (1)
        • Re: Compact Rr shifting - richie 04/11/05 (0)
    • Re: Compact Rr shifting issues - Al 03/25/05 (2)
      • Re: Compact Rr shifting issues - David Feldman 04/07/05 (0)
      • Re: Compact Rr shifting - Jim 03/25/05 (0)
  • Hayes disc brakes - Jenn 03/24/05 (2)
    • Re: Hayes disc brakes - Al 03/29/05 (1)
      • Re: BTW - Al 03/30/05 (0)
  • Campy crank with Shimano drive train - Conor 03/24/05 (4)
    • Re: Campy crank with Shimano drive train - Robert 03/31/05 (0)
    • Re: Campy crank with Shimano drive train - Jim 03/25/05 (2)
      • Re: Campy crank with Shimano drive train - Conor 03/25/05 (1)
        • Re: FD - Jim 03/25/05 (0)
  • rear gears - Dave 03/24/05 (1)
    • Re: rear gears - Al 03/29/05 (0)
  • Rolf vector comp spoke tension - tom horne 03/20/05 (5)
    • Re: Rolf vector comp spoke tension - cf 02/28/06 (0)
    • Re: Rolf vector comp spoke tension - cf 02/28/06 (0)
    • Re: Rolf vector comp spoke tension - Tim Mason 09/09/05 (0)
    • Re: Rolf vector comp spoke tension - Pieter 06/03/05 (0)
    • Re: Rolf vector comp spoke tension - Al 03/24/05 (0)
  • replacing seven speed drivetrain?! - alex 03/20/05 (1)
    • Re: replacing seven speed drivetrain?! - jim 03/20/05 (0)
  • 105 crank - Fred 03/18/05 (1)
    • Re: 105 crank - Jim 03/18/05 (0)
  • "older" columbus integrated head tube question - Luke 03/16/05 (2)
    • Re: "older" columbus integrated head tube question - Al 03/16/05 (1)
      • Re: BTW ... - Al 03/17/05 (0)
  • Looking for a Shimano FF rear cogset - marmer 03/13/05 (1)
    • Re: Looking for a Shimano FF rear cogset - Fred DeMetrovich 05/05/05 (0)
  • NEED triple 8 Spd Rr derailleur - Mike D 03/12/05 (4)
    • Re: NEED triple 8 Spd Rr derailleur - Jim 03/12/05 (2)
      • Re: NEED triple 8 Spd Rr derailleur - leon alcalde 07/24/06 (0)
      • Re: NEED triple 8 Spd Rr derailleur - antonio leon 07/24/06 (0)
    • Re: NEED triple 8 Spd Rr derailleur - Al 03/12/05 (0)
  • road to mtn crank switch - Jim Belair 03/11/05 (3)
    • Re: XTR cranks fit on road BB - Al 03/29/05 (0)
    • Re: road to mtn crank switch - Jim 03/13/05 (0)
    • Re: road to mtn crank switch - Al 03/12/05 (4)
      • Re: NEED triple 8 Spd Rr derailleur - Jim 03/12/05 (2)
        • Re: NEED triple 8 Spd Rr derailleur - leon alcalde 07/24/06 (0)
        • Re: NEED triple 8 Spd Rr derailleur - antonio leon 07/24/06 (0)
      • Re: NEED triple 8 Spd Rr derailleur - Al 03/12/05 (0)
  • spoke lacing over rim seams - Chris 03/11/05 (1)
    • Re: spoke lacing over rim seams - Randy Shoquist 03/11/05 (0)
  • carbon seatpost - titanium frame - Scott M 03/06/05 (2)
    • Re: carbon seatpost - titanium frame - Jay Levine 03/08/05 (1)
      • Re: carbon seatpost - titanium frame - Jesse Riel 05/12/05 (0)
  • compact drive front derailleur - Scott M 03/06/05 (6)
    • Re: compact drive front derailleur - Al 03/08/05 (5)
      • Re: compact drive front derailleur - Dave S 03/08/05 (4)
        • Re: compact drive front derailleur - Scott M 03/08/05 (3)
          • Re: compact drive front derailleur - Jay Levine 03/08/05 (0)
          • Re: compact drive front derailleur - jojo 03/08/05 (1)
            • Re: compact drive front derailleur - Scott M 03/09/05 (0)
  • Carbon to AL adhesive? - PaulK 03/03/05 (2)
    • Re: Carbon to AL adhesive? - kenny 03/07/05 (0)
  • Proflex 752 rear brake - john little 03/03/05 (2)
    • Re: Proflex 752 rear brake - Jeremy 01/05/06 (0)
  • Bianchi Cranks/BB - Kevin 02/28/05 (8)
    • Re: Bianchi Cranks/BB - RICHIE 03/01/05 (2)
      • - 11/07/06 (0)
    • Re: Bianchi Cranks/BB - Jim 03/01/05 (4)
      • Re: Bianchi Cranks/BB - Kevin 03/01/05 (2)
        • Re: Bianchi FD - Jim 03/02/05 (0)
  • Tying & soldering spokes - Lyle Strickland 02/28/05 (26)
    • Re: Tying & soldering spokes - Francis Ranwez 05/29/05 (0)
    • Re: Tying & soldering spokes - Randy Shoquist 03/04/05 (22)
      • - 08/17/06 (0)
    • Re: Tying & soldering spokes - richie 03/01/05 (0)
    • Re: Tying & soldering spokes - glenn Fenlason 03/01/05 (0)
  • 1984 Raleigh Portage Touring Bicycle - Tim 02/27/05 (6)
    • Re: 1984 Raleigh Portage Touring Bicycle - Ross 03/18/05 (0)
    • Re: 1984 Raleigh Portage Touring Bicycle - glenn 02/27/05 (3)
      • Re: 1984 Raleigh Portage Touring Bicycle - Dave 04/29/05 (1)
        • - 10/31/06 (0)
  • Question regarding cogs - Arcadia 02/26/05 (3)
    • Re: Question regarding cogs - glenn 02/27/05 (1)
      • Re: Question regarding cogs - Arcadia 03/03/05 (0)
  • Component Materials - nicholas 02/26/05 (4)
    • Re: Component Materials - Glenn 02/26/05 (3)
      • Re: Component Materials - nicholas 02/28/05 (1)
  • Change a 650 frame to a 700c? - larry phillips 02/21/05 (2)
    • Re: Change a 650 frame to a 700c? - glenn 02/21/05 (0)
    • Re: Change a 650 frame to a 700c? - Al 02/21/05 (0)
  • i need a good cheap bike - easy 02/21/05 (0)
  • change to compact drive - Scott M 02/20/05 (12)
    • Re: change to compact drive - Al 02/20/05 (11)
      • Re: change to compact drive - Jim 02/21/05 (10)
        • Re: change to compact drive - Al 02/21/05 (9)
          • Re: Shimano - Jim 02/23/05 (0)
          • Re: Simple answer. - Jim 02/23/05 (0)
          • Re: theory - Jim 02/23/05 (0)
          • Re: change to compact drive - errata - Al 02/21/05 (5)
            • Re: - errata - Jim 02/25/05 (4)
              • Re: - errata - Scott M 02/25/05 (3)
                • I'm loving it ... - Al 02/28/05 (2)
                  • Re: I'm loving it ... - richy 03/01/05 (0)
  • 7800 cranks - cdell 02/20/05 (3)
    • Re: 7800 cranks - Jim 02/20/05 (2)
      • Re: 7800 cranks - cdell 02/20/05 (1)
        • Re: 7800 cranks - Al 02/21/05 (0)
  • new shimano bb boo boo - brent 02/19/05 (2)
    • Re: new shimano bb boo boo - Al 02/19/05 (1)
      • Re: more - Al 02/24/05 (0)
  • WCS TUBING - Peter Olivetti 02/19/05 (1)
    • Re: WCS TUBING - Steve Gray 02/26/05 (3)
      • Re: Question regarding cogs - glenn 02/27/05 (1)
        • Re: Question regarding cogs - Arcadia 03/03/05 (0)
  • front derailer / chainring size compatabilities - glenn 02/18/05 (7)
    • Re: front derailer / chainring size compatabilities - Al 02/19/05